Archive for the Cleaning Methods Category
Cleaning grout between floor tiles in a commercial establishment is a hectic job. If you are a cleaning professional who does the job of cleaning grout between the floors, here are some steps that you need to follow.
Use oxygen bleach: This is a cleaning product. It is made from soda ash and hydrogen peroxide. It gets activated when mixed with lukewarm water. You must mix a cup of oxygen bleach using lukewarm water keeping in mind the direction of the package and pour the solution to the dry floor. Allow the grout lines to be completely saturated and add more solution as water soaks in the grout. Scrub the grout using our nylon-bristled brush after some time. We are an industrial brush distributor in Texas and supply different kinds of industrial brush for use like platers brush, abrasive brush, flue brush and lot more. But just keep one thing in mind after scrubbing with the nylon bristled brush. Pour new solution to the grout while scrubbing. After the scrubbing process is over, wipe the floor properly so that there is no slipping over while walking.
Use chlorine bleach and baking soda: If oxygen bleach proves to be ineffective in cleaning the grout, use chlorine bleach. But this solution must only be used on white grout. Pour a cup of baking soda into the bucket. Pour ½ cup of chlorine bleach onto baking soda. Stir baking soda using paint stirrer until the paste become consistent. Dip bristles of a used toothbrush into this paste and use it to scrub between the tiles. Allow the paste to cover the grout for some time and then rinse it with clean water.
Use a steam cleaning machine: When neither oxygen bleach nor chlorine bleach proved effective, it is at that time that steam cleaning machine needs to be used. You can rent a steam cleaning machine or purchase one if you need it often for cleaning floors of industrial areas. Connect the parts as per the instruction of the model and fill reservoir with water. Then turn the cleaner on and heat it to a proper temperature. After this is done, use it for cleaning. When the grout is removed, turn off the steam cleaner machine.
A chimney brush / flue brush is used for cleaning chimneys. These brushes are specially designed and are made up of different materials. A few essential materials like rope, gloves, chimney brush, ladder, protective goggles, dust mask and flashlights are necessary while taking away the soil from the chimney.
Features of chimney brushes:
- Material: Generally the flue brushes are available in two basic materials, one is metal and the other is polypropylene. In terms of metal twisted wire flue brushes (Brass) and twisted wire flue brushes (Carbon) are most commonly used. To clean a traditional chimney a metal wire brushes are more effective in scrubbing out the soot that gathered over it. But in case of metal coated chimneys, it is best to use the polypropylene chimney brushes as they will clean the pipes gently without occurring scratches.
- Shape: The chimney brushes may vary in shapes and sizes. Depending on the measurement of your chimney, you have to choose the right brush. It would be better if it is half inch wider than the flues width. The brushes may be square, rectangular, circular or oval and their size varies from 5 ft to 1 ft.
- Heights: To reach the top of the chimney, a brush rod is required. These rods are generally made up of fiberglass and you can bend them almost 90 degree while doing the cleaning. To enjoy a more efficient cleaning it is better to choose pliant rod.
To get more information about flue brush stay connected to our blog!
Cleaning a toilet is a very disgusting chore and there is a right way to do it. Employing the right way prevents the spread of viruses and bacteria. It even saves a lot of energy and time. Here is how you should start cleaning your toilet.
Let’s start with the things you will need to clean a toilet. They include:
- A plastic handle scrub brush
- Glasses or goggles
- A cleanser for cleaning the inside part of the toilet bowl
- A cleanser cleaning the outer part of the toilet
Now let us focus on the steps to clean the toilet.
Remove all excess items from around the toilet
Remove everything that’s on top of the tank. This will allow you to prevent dropping the items in toilet bowl during cleanup.
Flush and add a cleaning solution
Flush the toilet with its lid down so that water doesn’t splash around. After doing this, add a powdered, gel or liquid cleanser to the toilet bowl. Try applying the cleaner as close as possible to the toilet rim in order to prevent diluted cleanser.
Clean toilet’s exterior
When cleansing solution soaks into toilet grime in bowl, give your time to clean the toilet’s outer portion. Start from top to prevent dripping on the clean surfaces. Spray tank, tank edges and the handle with a cleaner and wipe it down. Also wipe down the bowl entirely. Start with front and sides before cleaning up the bottom edges of toilet.
Clean the seat of toilet
You must never neglect the seat of the toilet. It is that part, which comes into contact with people and so it should be thoroughly cleaned. First raise the seat and spray it. Also spray the inside lid and the rim with a cleanser and then wipe the seat, lid and hinges at back of toilet seat.
Clean inner portion of toilet bowl
Clean it from top down. Start scrubbing under rim using a plastic handle scrubbing brush. Make sure not to use sponges for doing this job. Look under the rim to get all the grime and stains scrubbed away. After that scrub the bowl. Lastly, scrub the hole at bottom of the toilet and flush it with its lid down. Look for an online brush supplier to get scrubbing brush at an affordable price.
Wipe any spills or drips
Wipe down spills of water or cleanser that have occurred. Keep all the cleaning tools in its place and throw all the trash. Then keep all the items,which you removed earlier from around the toilet, at its original position.
Don’t you think these steps are easy to follow? Follow them to clean your toilet. Professional companies always clean commercial toilet bowls this way stay.