Archive for the Flue Brush Category
Cleaning grout between floor tiles in a commercial establishment is a hectic job. If you are a cleaning professional who does the job of cleaning grout between the floors, here are some steps that you need to follow.
Use oxygen bleach: This is a cleaning product. It is made from soda ash and hydrogen peroxide. It gets activated when mixed with lukewarm water. You must mix a cup of oxygen bleach using lukewarm water keeping in mind the direction of the package and pour the solution to the dry floor. Allow the grout lines to be completely saturated and add more solution as water soaks in the grout. Scrub the grout using our nylon-bristled brush after some time. We are an industrial brush distributor in Texas and supply different kinds of industrial brush for use like platers brush, abrasive brush, flue brush and lot more. But just keep one thing in mind after scrubbing with the nylon bristled brush. Pour new solution to the grout while scrubbing. After the scrubbing process is over, wipe the floor properly so that there is no slipping over while walking.
Use chlorine bleach and baking soda: If oxygen bleach proves to be ineffective in cleaning the grout, use chlorine bleach. But this solution must only be used on white grout. Pour a cup of baking soda into the bucket. Pour ½ cup of chlorine bleach onto baking soda. Stir baking soda using paint stirrer until the paste become consistent. Dip bristles of a used toothbrush into this paste and use it to scrub between the tiles. Allow the paste to cover the grout for some time and then rinse it with clean water.
Use a steam cleaning machine: When neither oxygen bleach nor chlorine bleach proved effective, it is at that time that steam cleaning machine needs to be used. You can rent a steam cleaning machine or purchase one if you need it often for cleaning floors of industrial areas. Connect the parts as per the instruction of the model and fill reservoir with water. Then turn the cleaner on and heat it to a proper temperature. After this is done, use it for cleaning. When the grout is removed, turn off the steam cleaner machine.
A chimney brush / flue brush is used for cleaning chimneys. These brushes are specially designed and are made up of different materials. A few essential materials like rope, gloves, chimney brush, ladder, protective goggles, dust mask and flashlights are necessary while taking away the soil from the chimney.
Features of chimney brushes:
- Material: Generally the flue brushes are available in two basic materials, one is metal and the other is polypropylene. In terms of metal twisted wire flue brushes (Brass) and twisted wire flue brushes (Carbon) are most commonly used. To clean a traditional chimney a metal wire brushes are more effective in scrubbing out the soot that gathered over it. But in case of metal coated chimneys, it is best to use the polypropylene chimney brushes as they will clean the pipes gently without occurring scratches.
- Shape: The chimney brushes may vary in shapes and sizes. Depending on the measurement of your chimney, you have to choose the right brush. It would be better if it is half inch wider than the flues width. The brushes may be square, rectangular, circular or oval and their size varies from 5 ft to 1 ft.
- Heights: To reach the top of the chimney, a brush rod is required. These rods are generally made up of fiberglass and you can bend them almost 90 degree while doing the cleaning. To enjoy a more efficient cleaning it is better to choose pliant rod.
To get more information about flue brush stay connected to our blog!